Nexen MDU-625 929501 - Manual (Page 2)

2 FORM NO. L-20123-B-0210
Nexen Waterproof Guards allow existing Modules to be used in a wider range of applications. To install the Nexen Waterproof
Guard, remove existing Guard Ring Assembly and replace with Waterproof Guard. Align one of the four ribs of the housing
directly beneath clamp of Waterproof Guard. Tighten screws (Item 4) into attached cage nuts (Item 6) to 35 in-lbs of
torque. If piece parts are not connected to guard upon arrival, reassemble as shown below.
INSTALLATION
PARTS LIST
Item Description Qty
1 Guard 1
2 Rect. Washer 2
3 Vinyl Tape 2
4 Screw 2
5 Retaining Nut 2
6 Cage Nut 2
Model Product Number
MDU-625/875 929501
MBU-625/875 929502
MDU-1125/1375 935901
MBU-1125/1375 935902