Nexen 4H35P 923512 - Manual (Page 11)

11 FORM NO. L-20007-K-0913
24. Press the old Ball Bearings (Item 11) out of the Driving
Shell (Item 17).
25. Clean the bearing bore of the Driving Shell (Item 17)
with fresh solvent, making sure all old Loctite ® residue
is removed.
25. Apply an adequate amount of Loctite ® 680 to evenly
coat the outer race of the new Ball Bearings (Item
11).
26. Press the new Ball Bearings (Item 11) into the Driving
Shell (Item 17).
27. Reinstall the Retaining Ring (Item 19).
28. Slide the Driving Shell (Item 17) onto the Multiple Disc
Clutch.
29. Reinstall the Retaining Ring (Item 13).
FIGURE 8
17
11
11
19
PARTS REPLACEMENT: 4HP (continued)