Dometic RM36O - Manual (Page 5)

5
CLEARANCES
Minimum clearances in inches to combustible
materials are:
G : Top 0
K: Side 0
L: Bottom 0
M: Rear 1
Clearance M between the rear-most part of the
refrigerator and the wall behind the refrige-
rator.
Clearance N on top of the condenser is related
to the minimum ventilation height.
See Fig. 5 and examples below.
Fig.5
MEASUREMENTS
Distance
Refrigerator Overall Installation Recess
between top
dimensions dimensions dimensions
of condenser
model to top of
Height Width Depth Height Width Depth Height Width Depth
refrigerator
A B C h W d H W D e
RM360 30 3/8 21 11/16 22 1/16 29 9/16 20 1/4 20 3/16 29 3/4 20 1/2 21 3/16 1 1/4
RM460 32 15/16 23 24 11/16 32 1/8 21 9/16 22 3/4 32 5/16 21 13/16 23 3/4 1 1/4
RM660 40 13/16 23 24 11/16 40 21 9/16 22 3/4 40 3/16 21 13/16 23 3/4 1 1/4
RM760 52 23 24 11/1 51 3/16 21 9/16 22 3/4 51 3/8 21 13/16 23 3/4 1/8
Storane volumes
Refrigerator Total storage volume in cu ft
model
RM360 3.0
RM460 3.9
RM660 5.1
RM760 6.0
EXAMPLES
The clearance N for the RM360 model is derived
in the following way: at
A. Installation with upper and lower side vents.
N=Minimum ventilation height 37 minus in-
stallation height 29 9/16 plus distance
between condenser top and refrigerator top
1 l/4
N=37-29 9/16+1 l/4=8 11/16.
B. Installation with roof vent and lower side
vent.
N=Minimum ventilation height 31 minus in-
stallation height 29 9/16 plus distance
between condenser top and refrigerator top
1 l/4 plus distance between roof surface
and roof vent cap 5 l/4.
N=31-29 9/16+1 l/4+5 l/4=7 15/16.
Fig.6