TAMKO Evergrain User Manual
Page 3
Instructions to Install EverGrain
®
Envision
™
1" × 6" Decking as Skirting
REV. 02/12 © 2012 TAMKO Building Products, Inc. TAMKO and EverGrain are registered trademarks and Envision is a trademark of TAMKO Building Products, Inc.
For a different look, EverGrain Envision 1" × 6" decking may also be installed vertically as shown
in below. To install, cut boards to the desired length and apply vertically to the deck structure using
the same methods described previously.
1" × 6" DECK BOARDS
AS SKIRTING
See also other documents in the category TAMKO For Home:
- 10 INCH STARTER (1 page)
- 12-1/4" x 12" HIP & RIDGE (1 page)
- 19" SELVEDGE EDGE (2 pages)
- AWA NAILBASE (2 pages)
- AWABASE SA (2 pages)
- AWAPLAN SA FR (2 pages)
- AWAPLAN (4 pages)
- COOLRIDGE (1 page)
- ENVISION (2 pages)
- EverClip (5 pages)
- EG123 (4 pages)
- Fiberglass Slate Surface Roll Roofing (1 page)
- 12" x 12" HIP AND RIDGE (1 page)
- 12" x 12" HIP AND RIDGE (1 page)
- HERITAGE (2 pages)
- HERITAGE (1 page)
- HERITAGE (5 pages)
- HERITAGE (2 pages)
- HERITAGE VINTAGE (6 pages)
- Marquee Railing (12 pages)
- MetalWorks (8 pages)
- Moisture Guard Plus (3 pages)
- Peel-N-Stick Felt (2 pages)
- QuickVent (1 page)
- RAPID RIDGE (2 pages)
- Roll Vent (2 pages)
- SA (2 pages)
- Slate Surface Roll Roofing (2 pages)
- MODELS 31001282 (8 pages)
- MODEL 31001283 (8 pages)
- MODEL 31001280 (1 page)
- Synthetic Shield Underlayment (2 pages)
- TAM-RAIL (12 pages)
- Straight Rail (8 pages)
- Tam-Shield Synthetic Underlayment (2 pages)
- TW Moisture Wrap (8 pages)
- TW-60 (4 pages)
- XLP Turbo (1 page)