Ryobi RP4205 - Manual (Page 5)

5 — English
FEATURES
PRODUCT SPECIFICATIONS
Power ........................................... 4V rechargeable battery
Operation Environment ................Temperature 23º- 104 Fº
Storage Temperature .................... Temperature -4º- 140 Fº
Camera Resolution ........................................... 300K pixels Digital Zoom ....................................................................2X
LCD Screen Resolution ............................ 320 x 240 pixels
LCD Screen Size ....................................................... 2.7 in.
IP Rating .....................................................................IP52*
KNOW YO UR INSPECTION SCOPE
See Figure 1, page 8.
The safe use of this product requires an understanding of
the information on the tool and in this operator’s manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
AUTO POWER OFF
The inspection scope will automatically shut off when it has
been unused for five minutes.
BATTERY / CHARGE INDICATOR
The indicator in the left corner of the screen indicates when
the 4V battery pack is running low on charge.
CAMERA CABLE
When the camera on the end of the cable is pointed at an
object, the image is shown on the 2.7 in. high-resolution
LCD screen.
CAMERA LED
The inspection scope has a built-in light. This LED feature
is convenient when working in close or tight areas where
additional light is needed.
DIGITAL ZOOM
Go from a normal 1X view to 2X by pushing the digital zoom
button.
ROTATE BUTTON
With a press of the Rotate Button, the image can be flipped
180°.
*IP Rating: Specifies the environmental protection the product enclosure provides. An IP Rating of 52 denotes protection against harmful
deposits of dust and can withstand water spray from ≤ 15 degrees from vertical. The water resistance rating applies to the camera and
camera cable only. All other parts of the inspection scope are not water resistent and should not be submerged.
ASSEMBLY
UNPACKING
This product has been shipped completely assembled.

Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
could result in serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PACKING LIST
Inspection Scope
Operator’s Manual
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
WARNING:
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
product when assembling parts.