Tools needed features – Ryobi RTS20 User Manual
Page 13
13
The following tools (not included or drawn to scale) are needed for assembly and making adjustments:
TOOLS NEEDED
FEATURES
BLADES
For maximum performance, it is recommended that you
use the 36-tooth, 10 in. carbide-tipped combination blade
provided with your saw. Additional blade styles of the same
high quality are available for specific operations such as
ripping. Your local dealer can provide you with complete
information.
Kerf width must be within the limits stamped on the spreader/
riving knife.
WARNING:
Do not use blades rated less than the speed of this tool.
Failure to heed this warning could result in personal
injury.
Fig. 4
FRAMING SQUARE
PHILLIPS
SCREWDRIVER
FLATHEAD
SCREWDRIVER
SOCKET WRENCH
AND 10 mm SOCKET
COMBINATION
SQUARE
C-CLAMPS
See also other documents in the category Ryobi Power saws:
- BS903 (26 pages)
- BS903 (56 pages)
- ts1341 (30 pages)
- TS1350 (28 pages)
- 7-1/4 in. CIRCULAR SAW DOUBLE INSULATED CSB123 (22 pages)
- BAND SAW (24 pages)
- BTS21 (42 pages)
- SAW BT3100 (52 pages)
- BT3100-1 (52 pages)
- BT3100 (10 pages)
- JS550L (20 pages)
- JS550L (44 pages)
- MS181 (32 pages)
- CSB130 (2 pages)
- CSB1308 (20 pages)
- P550 (32 pages)
- 4730301 (10 pages)
- 7-1/4 in Compound Miter Saw TS1141 (32 pages)
- SS50 (14 pages)
- A18MS01 (12 pages)
- A18MS01 (32 pages)
- csb140lz (24 pages)
- TS230 (28 pages)
- A31TS04 (6 pages)
- CSB142LZ (6 pages)
- CSB142LZ (52 pages)
- CSB121 (22 pages)
- TS1301 (24 pages)
- TS1300 (28 pages)
- SC155VS (24 pages)
- TS1551 (30 pages)
- TS1351 (30 pages)
- TS1351 (28 pages)
- OJ1802 (18 pages)
- JSO48 (12 pages)
- SC163VS (20 pages)
- TS1550 (26 pages)
- BTS15 (38 pages)
- P530 (4 pages)
- P530 (46 pages)
- P500 (24 pages)
- P500 (68 pages)
- R10633 (20 pages)
- CSB130 (22 pages)
- JS550 (20 pages)