beautypg.com

Operating the trimmer – Ryobi ZR51950A User Manual

Page 18

background image

18

19

Operating the Trimmer

Operating the trimmer differs, depending on whether you are

using the curved shaft trimmer or the straight shaft trimmer.

WARNING:

Always hold the string trimmer away from the

body, keeping clearance between the body and

the product. Any contact with the housing or

string trimmer cutting head can result in burns

and/or other serious personal injury.

To Operate the Curved Shaft Trimmer
(Model No. ZR51950A)

See Figure 16a.
Follow these steps to operate the curved shaft trimmer.
1.

Start the trimmer.

2.

Hold the trimmer at waist level with your right hand

on the trigger handle and your left hand on the front

handle.

3.

Place the product on the right side of your body with

the engine behind and away from your body.

4.

Trim grass and weeds in a right-to-left motion with the

line parallel to the ground.

Figure 16a

To Operate the Straight Shaft Trimmer
(Model No. ZR51970A)

See Figure 16b.
Follow these steps to operate the straight shaft trimmer.
1.

Start the trimmer.

2.

Hold the trimmer at waist level with your right hand

on the trigger handle and your left hand on the front

handle.

3.

Place the product on the right side of your body with

the engine behind and away from your body.

4.

Trim grass and weeds in a left-to-right motion with the

line parallel to the ground.

Figure 16b

Figure 16c

Operation

To Advance the Cutting Line

See Figure 16c.
Follow these steps to advance the cutting line.
1.

Start the trimmer.

2.

Tap the retaining cap lightly on the ground while the

motor is running. The line will only advance with the

engine at full throttle. Do not hold the retaining cap

on the ground.

Note:

The line cutting blade on the grass deflector will

cut the line to the proper length.

Note:

To help prevent line tangle, tap only once to

lengthen the line. If additional line is required, wait a

few seconds before retapping the retaining cap. Do not

allow the line to wear too short. Keep the cutting line at

full length.

Retaining

Cap

PROPER OPERATING

POSITION

PROPER OPERATING

POSITION

This manual is related to the following products: