Ryobi RY80940 - Manual (Page 11)

7 — English
FEATURES
PRODUCT SPECIFICATIONS
Fuel Tank Capacity .....................................................................................................................................................0.96 gal
Honda GCV190 engine..................................................................................................................................................187cc
Lubricant Fill Volume ....................................................................................................................... Approximately 10-16 oz.
Maximum Pounds Per Square Inch Pressure* ......................................................................................................... 3,100 psi
Maximum Gallons Per Minute* ...................................................................................................................................2.5 gpm
Maximum Inlet Water Temperature ................................................................................................................................104˚F
*Max. rating determined by PWMA Standard 101
KNOW YOUR PRESSURE WASHER
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator’s manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
5-IN-1 CHANGE OVER NOZZLE
The 5-in-1 Change Over Nozzle makes it easy to change
spray patterns.
AUTOMATIC DETERGENT INJECTION SYSTEM
Pour pressure washer detergent into the detergent tank to
apply detergent quickly and easily to your cleaning project.
Use of the soap nozzle will activate the detergent injector
at a 20:1 dilution ratio.
FUEL TANK
This fuel tank has a maximum capacity of 0.96 gal. Use
unleaded automotive gasoline in the engine.
HONDA GCV190 ENGINE
This Honda engine enables the pressure washer to achieve
3,100 psi (pounds per square inch) at a rate of 2.5 gpm
(gallons per minute). Please read the engine manual included
with this product.
HOSE STORAGE
Once the high pressure hose is rolled, hang it on the back
of the machine using the stretch strap to secure in place.
IDLE DOWN
The engine idle speed is automatically reduced when the
trigger is released. This feature increases fuel efficiency,
reduces the noise level, and decreases wear and tear over
the life of the pressure washer.
ON/OFF SWITCH
The on/off switch is used in combination with the starter
grip and rope to start the engine. It is also used to turn the
engine off.
SPARK ARRESTOR
This engine is not factory equipped with a spark arrestor.
In some areas it is illegal to operate an engine without a spark
arrestor. A spark arrestor is available by calling customer
service for assistance.
STARTER GRIP AND ROPE
The starter grip and rope is pulled to start the machine.
THERMAL RELIEF VALVE
This pump feature will prevent water temperatures from
reaching harmful levels by releasing a small amount of
water. Once the water has drained, the thermal relief valve
will reset itself.
TRIGGER HANDLE
The trigger handle has a gripping surface that provides
added control of the spray wand and helps reduce fatigue.
TRIGGER WITH LOCK OUT
Pulling the trigger releases a stream of water for high
pressure cleaning. The lock out provides protection against
unauthorized use.