G-Shock MRG-8100B-1A - Manual (Page 67)

66
Configuring Time and
Date Settings Manually
You can use the following procedures to adjust the time and date
settings when the watch is unable to receive a time calibration signal
for some reason.
1.
In the Timekeeping Mode,
keep A depressed (for about
five seconds) as the second
hand goes through the
sequence described below.
Moves to the city code of the current • •
Home City setting.
Moves to the last signal reception
• •
result (“Y” or “N”), then to “Ready”
(or “R” for some models), and then
back to the city code of the currently
selected Home City.
The watch will exit the setting screen automatically if you do
• •
not perform any operation for about two or three minutes.
Any changes you have made to settings up to that point will
be saved.
3ECOND