G-Shock MRG-220T-1 User Manual

Page 2

1829-2

4. After you select the character you want, press

to advance the cursor to the

right.

•

Repeat steps 3 and 4 until you complete name input.

•

You can input up to 8 characters in the name area.

5. After the name input is through, use

to move the cursor to the number area.

6. While the cursor is in the number area, use

to input a number you want.

The character changes in the following sequence. Holding down either button
changes the character at high speed.

7. After you select the character you want, press

to advance the cursor to the

right.

•

Repeat steps 6 and 7 until you complete number input.

8. After inputting the data you want, press

to store it into memory.

•

The message SORT appears on the display for a few seconds.

•

The name area shows only 5 characters, but automatically scrolls from right to left
to show all of the characters that make up the text.

To scroll through File data

In the normal File Mode (when the display is not flashing), press

to scroll

forward or

to scroll backward through stored data.

•

The data item that is displayed when you exit the File Mode will be the first data
to appear when you enter the File Mode again.

To edit File data

1. In the File Mode, use

and

to scroll through the data items and display the

one you want to edit.

2. Hold down

until the flashing cursor appears on the display.

3. Use

to move the cursor to the character you want to change.

4. Use

to select the character you want.

•

For details, see “To input File data” (steps 3 through 4 for name input, or 6
through 7 for number).

5. After editing the data, press

to store it.

To delete File data

1. In the File Mode, use

and

to scroll through the data items and display the

one you want to delete.

2. Hold down

until the flashing cursor appears on the display.

3. Press

and

at the same time to delete the data item.

•

The message CLR (clear) appears on the display for a few seconds.

•

At this time the cursor appears on the display ready for input.

4. Input data or press

to return to the File Mode.

– (Hyphen)

0 to 9

(Space)

Press

ALARM MODE

When the Daily Alarm is turned on, the alarm
sounds for 20 seconds at the preset time each day.
Press any button to stop the alarm after it starts to
sound. When the Hourly Time Signal is turned on,
the watch beeps every hour on the hour.

•

The alarm sounds when the time selected for basic
timekeeping in the Timekeeping Mode (TIME 1 or
TIME 2) matches the alarm time you set.

To set the alarm time

1. Hold down

while in the Alarm Mode. The hour

digits flash on the display because they are
selected.

At this time the Daily Alarm is turned on

automatically.

2. Press

to change the selection in the following

sequence.

3. Press

to increase the selected digits and

to decrease them. Holding down

either button changes the selection at high speed.

•

The format (12-hour and 24-hour) of the alarm time matches the format you
select for normal timekeeping.

•

When setting the alarm time using the 12-hour format, take care to set the time
correctly as morning (no indicator) or afternoon (P).

4. After you set the alarm time, press

to return to the Alarm Mode.

•

If you do not operate any button for a few minutes while a selection is flashing,
the flashing stops and the watch goes back to the Alarm Mode automatically.

Hour

Minutes

To switch the daily alarm and hourly time signal on and off

Press

while in the Alarm Mode to change the status of the daily alarm and

hourly time signal in the following sequence.

To test the alarm

Hold down

while in the Alarm Mode to sound the alarm.

Alarm on indicator

Hourly time signal on indicator

Both ON

Both OFF

Hourly Time Signal only

Daily Alarm only

10 58

6 -30 t U

STW

10 58

6 -30 t U

AA'AA&AA

STOPWATCH MODE

The Stopwatch Mode lets you measure elapsed
time, split times, and two finishes. The range of
the stopwatch is 59 minutes, 59.99 seconds.

Mode indicator

Current time

Minutes

Seconds

1/100 seconds

(a) Elapsed time measurement

Start

Stop

Re-start

Stop

Clear

(b) Split time measurement

Start

Split

Split release

Stop

Clear

(c) Split time and 1st-2nd place times

Start

Split

Stop

Split release

Clear

➤

First runner
finishes.

Second runner
finishes.
Record time of
first runner.

Record time of
second runner.

AUTO DISPLAY FUNCTION

The Auto Display function of this watch continually changes the contents of the display.
Note that you cannot use any of the watch’s other functions while the Auto Display
function is operating.

To turn the Auto Display on

Hold down

for about two or three seconds in any mode until the watch beeps.

To turn the Auto Display off

Hold down

for about two or three seconds until the watch beeps. At this time the

watch is in the Timekeeping Mode.

Note
The Auto Display function cannot be performed while you are making settings (i.e.
while digits or other setting are flashing on the display).

CITY CODE TABLE

10 58

6 -30 t U

ALARM

10 58

6 -30 t U

BC:AA

Mode
indicator

Minutes

Hourly time
signal on
indicator

Alarm on
indicator

PM
indicator

Hour

Current
time

ADL

ADELAIDE

+9.5

ANC

ANCHORAGE

–09

BER

BERLIN

+01

BKK

BANGKOK

+07

CAI

CAIRO

+02

CCS

CARACAS

–04

CHI

CHICAGO

–06

DAC

DHAKA

+06

DEL

DELHI

+5.5

DEN

DENVER

–07

DXB

DUBAI

+04

GUM

GUAM

+10

HKG

HONG KONG

+08

HNL

HONOLULU

–10

IST

ISTANBUL

+02

JED

JEDDAH

+03

JRS

JERUSALEM

+02

KBL

KABUL

+4.5

KHI

KARACHI

+05

LAX

LOS ANGELES

–08

LON

LONDON

+00

MEX

MEXICO CITY

–06

MIA

MIAMI

–05

MIL

MILAN

+01

MLE

MALE

+05

NOU

NOUMEA

+11

NYC

NEW YORK

–05

PAR

PARIS

+01

PPG

PAGO PAGO

–11

RGN

YANGON

+6.5

RIO

RIO DE JANEIRO

–03

ROM

ROME

+01

SEL

SEOUL

+09

SFO

SAN FRANCISCO

–08

SIN

SINGAPORE

+08

SYD

SYDNEY

+10

THR

TEHRAN

+3.5

TYO

TOKYO

+09

WLG

WELLINGTON

+12

YVR

VANCOUVER

–08

City

GMT

Code

differential

Based on data as of December 1997.

This manual is related to the following products:

1829