G-Shock G-7500-1 - Manual

Operation Guide 2943
1
MO0501-EA
About This Manual
• Button operations are indicated using the letters shown
in the illustration.
• Each section of this manual provides you with the
information you need to perform operations in each
mode. Further details and technical information can be
found in the “Reference” section.
(Light)
General Guide
• Press D to change from mode to mode.
• In any mode, press L to illuminate the display.
Telememo Mode World Time Mode
Stopwatch Mode
Timekeeping Mode
▲ ▲
▲
Countdown Timer
Mode
▲ ▲
Alarm Mode
Press D.
▲
Timekeeping
Use the Timekeeping Mode to set and view the current
time and date. You can also use the Timekeeping Mode to
select either audible beeper or vibration alert for alarms.
Day of week
Month – Day
Hour : Minutes Seconds
PM
indicator
To set the time and date
1. In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
2. Press D to move the flashing in the sequence shown
below to select other settings.
Hour DST Seconds
Day Month Year
Minutes
3. When the setting you want to change is flashing, use E and B to change it as
described below.
llll
lllll
lll
ll
lll
To change this setting
Seconds
DST
Hour, Minutes, Year,
Month, Day
Perform this button operation
Press E to reset to 00.
Press E to toggle between Standard Time ( OFF )
and Daylight Saving Time ( ON ).
Use E (+) and B (–) to change the setting.
4. Press A to exit the setting screen.
• See “Daylight Saving Time (DST)” for details about the DST setting.
• For information about specifying how long the display of the watch remains
illuminated, see “To specify the illumination duration”.
• The day of the week is displayed automatically in accordance with the date (year,
month, and day) settings.
Daylight Saving Time (DST)
Daylight Saving Time (summer time) advances the time setting by one hour from
Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.
To toggle the Timekeeping Mode digital time between DST and Standard Time
1. In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
2. Press D once and the DST setting screen appears.
3. Press E to toggle between Daylight Saving Time (
ON
displayed) and Standard Time ( OFF displayed).
4. Press A to exit the setting screen.
• The DST indicator appears on the display to indicate
that Daylight Saving Time is turned on.
llll
llll
lll
ll
ll l
l lll
llll
lll
ll
l l l
DST indicator
To toggle between 12-hour and 24-hour timekeeping
In the Timekeeping Mode, press B to toggle between 12-hour timekeeping and 24-
hour timekeeping.
• With the 12-hour format, the P (PM) indicator appears on the display for times in the
range of noon to 11:59 p.m. and no indicator appears for times in the range of
midnight to 11:59 a.m.
• With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
any indicator.
• The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
applied in all modes.
Vibration Alert
When Vibration Alert is turned on, the watch vibrates instead of sounding a beeper.
This lets you use the watch without disturbing others with beeping sounds.
• Vibration Alert can be used to replace alarm sounds.
• For information about selecting the alert type, see “To switch between vibration alert
and beeper alert” below.
• For information about countdown timer alerts, see “Countdown Timer”.
• For information about the daily alarm and hourly time signal alerts, see “Alarms”.
• Watches with a metal band may produce a noise when a vibration operation is
performed. This is due to vibration of the metal band, and does not indicate
malfunction of the watch.
To switch between vibration alert and beeper alert
In the Timekeeping Mode, hold down E for about two
seconds to toggle between vibration alert (VIBRATION
displayed in all modes) and beeper alert (VIBRATION not
displayed). Vibration alert on
indicator
Telememo
The Telememo Mode lets you store up to 30 records, each containing name and
telephone number data. Records are automatically sorted based on the characters of
the name. You can recall records by scrolling through them on the display.
• See “Sort Table” for details on how the watch sorts records.
• All of the operations in this section are performed in the Telememo Mode, which you
enter by pressing D.
▲
Telephone number
▲
Name
Alternate at
two-second
interval
Right arrow
TEL
Left arrow
To create a new Telememo record
1. In the Telememo Mode, press C to display the
remaining memory screen.
• If the message appears on the display, it
means that memory is full. To store another record,
you will first have to delete some of the records stored
in memory.
2. Hold down A until the flashing cursor ( _) appears in
the name area of the display.
3. In the name area, use E and B to cycle through
characters at the cursor position. The characters cycle
in the sequence shown below.
| |
|
|| ||
|
| |
Remaining Memory
Screen
Name area
Number area
A
to
Z
(space)
0
to
9 - . : /
Press E.
Press B.
4. When the character you want is at the cursor position, press D to move the cursor
to the right.
5. Repeat steps 3 and 4 as required to input all of the characters of the name.
• You can input up to eight characters for the name.
6. After you input the name, press D as many times as necessary to move the cursor
to the number area.
• When the cursor is located at the eighth space of the name area, moving the
cursor to the right causes it to jump to the first digit of the number. When the
cursor is at the 12th digit of the number, moving it to the right (by pressing D)
causes it to jump to the first character in the name.