Denon AVR-2807 - Manual (Page 37)

33
Basic Operation Basic Operation
ENGLISH
ENGLISH
• Select “Default Yes” and press F F to reset all the settings.
Press D D H H to select the item, then press F F G G to
set.
Press ENTER or SURROUND PARAMETER .
Selecting the DSP surround simulation
Press SURROUND PARAMETER .
Press [DSP SIMULATION] .
7CH STEREO WIDE SCREEN SUPER STADIUM
JAZZ CLUB
ROCK ARENA
MATRIX
VIDEO GAME CLASSIC CONCERT MONO MOVIE
VIRTUAL
The 7CH STEREO mode can be selected directly by
pressing <7CH STEREO>.
1
2
3
4
EFFECT: (WIDE SCREEN mode only)
Effect signals with the multi-surround speaker effects are
played. When set to “OFF”, the SL/ SR channels are played
from the SBL/ SBR channels, respectively.
LEVEL: (WIDE SCREEN mode only)
Adjust the strength of effect signals “1” to “15”.
ROOM SIZE:
Adjust the imaginary size of the recreated sound field space.
(Does not express size of room in which played.)
There are 5 parameters: “small”, “med.s”, “medium”,
“med.l” and “large”.
SB CH OUT
• ON:
Surround back channel played.
• OFF:
Surround back channel not played.
This operation can also be performed using BACK>.
EFFECT LEVEL:
Adjust the strength of the surround effect.
DELAY TIME: (MATRIX mode only)
Adjust the delay time between “0 ms” and “300 ms”.
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
D H F G
<7CH STEREO>
DSP
SIMULATION
SURROUND
PARAMETER ENTER
SURROUND
PARAMETER
ENTER
D H F G
DSP SIMULATION