Bose Wave Music System-soundlink - Manual (Page 24)

20
P ERSONALIZING YOUR W AVE ® MUSIC SYSTEM
English TAB 6 TAB 8 TAB 7 TAB 3 TAB 5 TAB 2 TAB 4
Setting the room code
Your Wave ® music system comes from the factory
ready to operate as a second room (room code B)
when connected to a Bose
® link enabled Lifestyle ®
system. If you want to use your Wave ® music system
with your Lifestyle ® system beyond a second room you
will need to change the room code to match that of the
remote control you are using for that room.
Refer to your Lifestyle ® system owner’s guide for more
information on room codes.
1. Press and hold Alarm Time (Menu) until
– SETUP MENU – is displayed.
2. Press Tune/MP3 six times until
ROOM
– B is displayed. The
dashes following the room letter
indicate how the microswitches should
be set on the Lifestyle
® remote control.
3. Press Time – or Time + to select a
room code other than room B.
4. Press Alarm Time (Menu) to exit the
setup menu or wait 10 seconds for the
setup menu to end automatically.
Performing a system reset
If you wish, you can restore your Wave ® music system to
the original factory settings.
1. Press and hold Alarm Time (Menu) until
– SETUP MENU – is displayed.
2. Press Tune/MP3 seven times until
RESET ALL
– NO is displayed.
3. Press Time – or Time + to change
RESET ALL
– NO to RESET ALL –
YES.
4. When PRESS 2 TO CONFIRM
appears on the display, press
Presets button 2. When the reset
is complete, DEFAULTS RESET
is displayed.
5. Press Alarm Time (Menu) to exit the
setup menu or wait 10 seconds for the
setup menu to end automatically.
00_SoundLink_book.book Page 20 Tuesday, July 7, 2009 9:58 AM