DigiTech RP21D User Manual
Page 47
Pitch Shifters Parameters
Note: not all of the parameters listed below are available in all Pitch Shifter modules.
FX: Lvl
Controls the signal input level fed to the Module. Ranges from Off to 100%.
Dry: Lvl
Controls the level of the dry (uneffected) signal. Ranges from Off to 100%.
Balance
Controls the positioning of the dry signal in the stereo soundfield. Ranges from -99 (all left) to 99 (all right)
Shft A - B
SHFTA and SHFTB control the pitch intervals between the original note and voices A and B of the pitch shifter. Pitch
shifters can be used for a wide variety of effects, including doubling, octave division, and chromatic harmonies. Each
Pitch Shifter has a 4-octave range, stepped in semitones from -24 to +24.
Dtn A - B
Controls the detuning amount for pitch-shifted voices A and B. As DTN moves away from zero, dissonance becomes
more pronounced. Low DTN settings can be useful for thickening or enhancing the imaging of the source material.
Ranges from -50% to 50%.
Shft C - D
See Shift A - B.
Dtn C - D
See Dtn A - B.
Shft E - H
See Shift A - B.
Dtn E - H
See Dtn A - B.
Key
Sets the diatonic key for the harmonies. If the song you are playing is in the key of G Major, you would select G for
the scale.
Scale
Sets the scale type for the Harmony you want to hear. Scale types include: Major, Minor, Harmonic Minor, Melodic
Minor. Dorian, Mixolydian, Lydian, Lydian Augmented, Major Pentatonic, Minor Pentatonic, Blues, Whole Tone, Half-
Whole,and Whole-Half.
Interval
Sets the basic interval of the Harmony. You can choose from one of several Harmony intervals. See the Harmony
Interval Charts for reference.
Out A - B
Adjusts the overall level of pitch-shifted voice A or B. Ranges from Off to 100%.
Pan A - B
Controls the placement of pitch-shifted voice A or B in the stereo image. Ranges from -99 (all left) to 99 (all right).
Out C - D
Adjusts the overall level of pitch-shifted voice C or D. Ranges from Off to 100%.
Pan C - D
Controls the placement of pitch-shifted voice C or D in the stereo image. Ranges from -99 (all left) to 99 (all right).
Out E - H
Adjusts the overall level of pitch-shifted voice E through H. Ranges from Off to 100%.
Pan E - H
Controls the placement of pitch-shifted voice E through H in the stereo image. Ranges from -99 (all left) to 99 (all
right).
42
RP21D User’s Guide Section Two - Editing Functions