Getting started – DirecTV D12 User Manual
Page 12
6
Getting Started
DIRECTV Receiver Rear Panel
DIRECTV Receiver Rear Panel
Your equipment may not look exactly like the model illustrated.
1)
SATELLITE
IN – Use to connect the DIRECTV Receiver to the satellite dish antenna. If your
installation includes an FTM (Frequency Translator Module), connect the FTM output to this
input. FTM is a technology that allows multiple tuners to work with a single satellite input.
(FTM support may require a software upgrade. Ask your DIRECTV Installer for details.)
2)
OUT TO TV – Connects the DIRECTV Receiver to your TV or VCR using RF coaxial cable.
This jack provides the most basic connection, carrying good sound and video quality.
3)
OFF-AIR
IN – Connect a standard TV antenna or cable feed to the DIRECTV Receiver using
this jack. You can then switch between the DIRECTV Receiver’s signal and the TV/cable feed.
4)
3/4 CHANNEL SWITCH – Allows you to choose the channel that is not used in your
area (3 or 4) when the receiver is connected to TV using RF coaxial cable from the
DIRECTV Receiver’s OUT TO TV.
6
1
2
3
4
6
7
8
9
10
5
D12_MUG.indb 6
D12_MUG.indb 6
9/19/07 9:39:42 AM
9/19/07 9:39:42 AM