Directed Electronics Avital 3200 User Manual

Page 13

2000 Directed Electronics, Inc.

You can prevent your system from automatically activating the

optional Failsafe

Starter Kill and locking the doors by using Valet

Mode. This is very useful when washing the vehicle or having it

serviced. In Valet

Mode, the optional starter kill cannot be acti-

vated, even with the transmitter, but all convenience functions

(door locks, remote start, etc.) will continue to work normally.

To enter or exit Valet

Mode:

1. Turn the ignition on.

2. Turn the ignition off.

3. Press and release the Valet

switch within 10 seconds.

The status LED will light steadily if you are entering Valet

Mode

and will turn off if you are exiting Valet

Mode.

If you are threatened in or near your vehicle, you can attract

attention by triggering the system with your transmitter. Just

press

for 1.5 seconds to enter Panic Mode. In Panic Mode, the

horn will honk and the parking lights will flash for 30 seconds. To

stop Panic Mode at any time, press

, or

on the

transmitter.

NOTE: In order for Panic Mode to be effective, the vehicle’s horn (or
optional siren) as well as the vehicle's parking lights must be
connected.

Panic Mode

DRW-35

Valet

Mode