Volant Yukon XL 1500 - Manual (Page 2)

Closed Box Air Intake System
09-13 GM Truck/SUV 4.8/5.3L/6.0/6.2L
PN 15453/154536
7/16//2014
INS15453 Volant Performance · 140 Blaze Industrial Pkwy · Berea, OH 44017 · P: (909) 481.3888 · F: (440) 891‐1868
2
E-Mail: [email protected] www.volant.com
Please take time to read and understand these installation instructions.
Volant recommends that the installation of this system be performed by a qualified service center or professional
installer who has the necessary equipment, tools and experienced personnel. However, if you decide to perform this
install the use of an additional person may be required.
CAUTION: Never work on a hot engine bay. Allow time for the vehicle to cool.
Recommended Tools:
• Flathead Screwdriver
• Assorted Socket‐Set • Ratchet
• Ratchet Extension
Please confirm that all parts are present before beginning the installation.
Bill of Materials
1 Plastic air box 5 ¼ x 5/8 Rubber washers 1 Pro5 or PowerCore® Filter 1 Throttle body grommet
1 Plastic air duct 5 ¼ ‐20 x .50’ Truss head screw 2 #60 Clamps 1 D‐526‐4 CARB Decal
1 MAF Adapter 4 6mm – 25 Bolts 1 #72 Clamp 1 D‐526‐6 CARB Decal
1 Aluminum air box lid 4 ¼ Lock washers 1 T‐ 15 Torx bit 3 #10 Washers
1 Inspection window for aluminum lid 4 ¼ x 7/8 Washers 2 4mm x 12 Pan head screws 3 #10 Lock washers
1 Lid gasket 1 3.75 Hump hose 1 3/8 x 10.5 breather hose 3 10/32 x .625 Screws