Vortech Maxflo Fuel Pump Booster (FPB) - "Universal Fit" User Manual

Page 4

DP/N: 007128v1.1, 2012-04-30

VORTECH FUEL PUMP VOLTAGE BOOSTER

Universal Wiring Instructions

Before beginning this installation,

please read through this entire instruction booklet

The Vortech Fuel Pump Booster (FPB) upgrade was designed specifically for use on

performance applications where there is a requirement to provide increased fuel pump

performance above what the vehicles' existing fuel pump can provide. Typical applica-

tions would include vehicles equipped with forced induction, nitrous oxide etc. As with

any power enhancing product, this unit is intended for use on healthy, well-maintained

engines. Vortech Engineering is not responsible for engine or fuel component damage.
For best performance and continued durability, please take a note of the following key

points:

Use only premium grade fuel 91 octane or higher (R+M/2).

Always listen for any sign of detonation (pinging) and discontinue hard use (no

boost) until problem is resolved.

TOOL & SUPPLY REQUIREMENTS:

• General hand tools
• Heat Gun
• Soldering Iron/Gun

Solder

•
• Electrical Tape
• Wire Cutters, Strippers and Crimpers
• Drill Motor
• Drill Bit

Mounting hardware

•

(optional- OEM fuel pump wiring schematic)

•