Engineering, llc – Vortech Universal Battery Relocation User Manual

Page 6

P/N: 007079

28JAN04 v1.0 BattRelocRoutng(7079v1.0)

ENGINEERING, LLC

1650 PACIFIC AVENUE • CHANNEL ISLANDS, CA 93033-9901 • (805) 247-0226

FAX (805) 247-0669 • www.vortechsuperchargers.com • M-F 8:00 AM - 4:30 PM PST

vertical tabs off of the hold-down bracket

depending on your battery.) Secure the sup-
plied battery hold-down bracket using 3/8-16
nuts and washers. Attach the clear hose end
to the plastic 90

fitting mounted on the side of

the battery box. (

Refer back to Fig. 5

Trim the power and ground cables to desired

length, cut back the insulation and install the
supplied battery end terminals. Use the sup-
plied 1-1/2" heat shrink tubing to cover any
bare metal surfaces on the cable/terminal
connections. (

See Fig. 6

Q. Connect the supplied battery terminals to the

battery. Install the supplied battery box lid and
secure with the supplied washers and wing
nuts. Using a hacksaw, cut the all-thread to
where there is 3/4" of thread exposed above
the wing nuts. (

See Fig. 7

R. Reinstall the trunk carpeting and interior trim

pieces. From beneath the vehicle, secure the
end of the clear hose away from the exhaust
and any moving or sharp components. (

See

Fig. 8

BATTERY RELOCATION AND CABLE ROUTING, cont’d.

Fig. 6

Fig. 7

Fig. 8