Notices, Important, Read before installation is started) – Vortech 8-Rib Drive Upgrade for 2000-2004 Mustang GT User Manual

Page 4

P/N: 007043

(007043v1.1)00-04MusGT

This product may not be legal for use on public roads in all 50 states.

NOTICES

(Read before installation is started)

Included in this kit is an 8-rib supercharger pulley that may be smaller than the one originally

supplied. This new pulley is recommended to achieve the best performance results. Removal of

the factory sealed pulley will reduce the supercharger warranty from three years to one year

unless the supercharger unit (with the original pulley still attached) and new pulley are sent into

Vortech for removal, installation and re-sealing. If the supercharger warranty is not a concern or

if the supercharger warranty has expired, the pulley may simply be removed and replaced with

the new part supplied. Hammering/prying etc. on the supercharger and/or pulley will cause

damage to the parts. Light heating of the supercharger pulley with a propane torch (if the pulley

is tight on the shaft) will aid removal. A return authorization number is required before the

supercharger and pulley are sent into Vortech. Call the Vortech service department at (805) 247-

0226 for a return authorization number. Return freight (ground) will be paid by Vortech.

This product is protected by state common law, copyright and/or patent. All legal rights therein

are reserved. The design, layout, dimensions, geometry, and engineering features shown in this

product are the exclusive property of Vortech Engineering, LLC/Paxton Automotive. This prod-

uct may not be copied or duplicated in whole or part, abstractly or fundamentally, intentionally

or fortuitously, nor shall any design, dimension, or other information be incorporated into any

product or apparatus without prior written consent of Vortech Engineering, INC / Paxton

Automotive.

• Custom ECM programming and fuel / ignition system upgrades will be required when

changing the supercharger drive pulley to any size other than what was originally supplied

in the complete supercharger kit.

• Supercharger pulley removal may reduce or void the supercharger unit warranty.
• Pulley Diameter Changes: Careful size selection is mandatory for proper engine and super-

charger longevity. Contact the applicable Vortech and Paxton tech line for assistance with

impeller speed calculations if necessary.

• A Vortech Maxflow Race or Mondo compressor bypass valve is required for applications

producing more than 11-12 psig.

IMPORTANT