Vortech 8-Rib Drive Upgrade for 2011-2012 Mustang GT User Manual
Page 10
2
P/N: 007130 v1.0, 2012-02-10
© 2012 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured.
FROM THE TOP:
1.
Remove strut tower brace.
2.
Remove air inlet assembly.
3.
Disconnect Mass Air Sensor (MAS) connec-
tor.
4.
Remove MAS and tubing connected to
throttle body.
5.
Loosen 4 bolts on the water pump pulley,
with belt on.
Fig 3
Fig 4
REMOvE STRUT
POWER BRACE
REMOvE AIR INLET
ASSEMBLy
DISCONNECT MASS
AIR SENSOR
REMOvE TUBING TO
THROTTLE BODy
LOOSEN 4 BOLTS ON
WATER PUMP PULLEy