Vortech 1999-2001 Ford 6.8L Super Duty - Manual (Page 13)

P/N: 8N020-100
©2002 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
28MAR02 V1.0 (99-01SDPwrCoolr(8N020-100V1.0)
7
6. CHARGE COOLER INSTALLATION , cont’d.
7. HOSE INSTALLATION & SYSTEM FILLING
A. Attach the surge tank mounting bracket to the
surge tank using the supplied 1/4" hardware.
Using
Fig. 7-a and the surge tank assembly as
a template. Drill a Ø9/32" hole in the vehicle’s
evaporator bracket and secure the surge tank
assembly with the 1/4" hardware.
B. Cut an 8" section of the Ø3/4" hose and attach
one end to the driver’s side fitting on the water
cooler and the other end to the inlet of the water
pump. Secure both ends with the provided nylon
clamps. (See
Fig. 7-b.)
Fig. 7-a
CONNECT TO VALVE COVER
BYPASS
VALVE
FLEX HOSE
DUCT, TUBE A
DUCT, TUBE C
CHARGE AIR
COOLER
DUCT, TUBE B
MAF BRACKET ASSEMBLY
TO IDLE AIR CONTROL
ALUMINUM
INLET
DUCT
Ø5/8" HOSE
UNION
Fig. 6-d / See Appendix A-1 for detail