Voodoo Lab Control Switcher User Manual
Page 9
Here’s how to select between the two momentary modes:
1.) Apply power while holding down button #3. LED #3 will flash until you release
the button.
2.) Press button #3 to select the mode.
Momentary Mode
LED #3
Pulse ON/OFF
OFF
Pulse ON only
ON
3.) Remove power when finished.
Set MIDI Channel
MIDI program change and control change messages include a channel number,
1 through 16. Control Switcher will only respond to messages received on its
specified channel.
The default MIDI channel is 1.
Note: When Control Switcher is being controlled by a Voodoo Lab Commander
or Ground Control Pro, its MIDI channel is ignored.
Here’s how you set the MIDI channel:
1.) Apply power while holding down button #2. LED #2 will flash until you release
the button.
2.) Find your desired MIDI channel from the table and press each button to
match.
MIDI
Channel
LED #1
LED #2
LED #3
LED #4
1 OFF
OFF
OFF
OFF
2 ON
OFF
OFF
OFF
3 OFF
ON
OFF
OFF
4 ON
ON
OFF
OFF
5 OFF
OFF
ON
OFF
6 ON
OFF
ON
OFF
7 OFF
ON
ON
OFF
8 ON
ON
ON
OFF
9 OFF
OFF
OFF
ON
10 ON OFF
OFF
ON
11 OFF ON
OFF
ON
12 ON ON
OFF
ON
13 OFF OFF
ON
ON
14 ON OFF
ON
ON
15 OFF ON
ON
ON
16 ON ON
ON
ON