SoundMax SM-CDM1050 - Manual (Page 27)

27
Securing the speakers
Position the speaker into the mounting hole and reconfirm the correct mounting location
and hole placement.
Screw clips are provided to ensure a snug fit. These should be placed over the metal
surface and line up the hole you have previously drilled with the screw clip. Place the
speaker into the hole, align the holes and proceed to insert the screws. Be sure to tighten
the screws evenly so that it will not warp the speaker frame.
Turn your system back on and confirm the speakers operation first at a low volume and
then you may increase the volume as you desire.