SoundMax SM-CDM1050 - Manual (Page 25)

25
Important safeguards
The owner’s manual contains important operating and maintenance instructions for your
safety. It is necessary to refer the manual.
Do not install the speakers where they may be subjected to excessive heat moisture, dust
or where they will be kicked repeatedly, brushed or bumped.
Before mounting and connecting the wires be sure that wire of the negative pole terminal
is disconnected from accumulator. Nonobservance of this demand may cause the short
circuit or fire.
To prevent short circuit never put or leave any metal objects (e.g. coins or metal tools)
inside the acoustic system.
Make absolutely sure that the terminals for the speakers are connected to the proper
outputs from the music source.
Never run the wiring on the outside of the vehicle or under it where it can be damaged by
road hazards or the moving parts of the vehicle. Use existing wire channels, sills, panels
and molding strips inside the vehicle to hide the wiring for safety and a neat appliance.
Make sure the wire of the negative pole terminal is disconnected from accumulator while
connecting the speaker terminals. Turn on the various components and slowly advance the
volume. Remember to check and re-check all connections to insure proper installation and
use.
Do not continuously use the speaker system beyond the nominal power handling capacity.
Keep recorded tapes, watches, and personal credit cards using magnetic coding away from
the speaker system to protect them from damage caused by the magnets in the speakers.
If you cannot find the appropriate mounting location, consult your car dealer or your
nearest dealer before mounting.
CAUTION: Take extreme caution when working near the gas tank, gas lines, brake or hydraulic
lines and electrical wiring.