Velodyne WiConnect User Manual
Page 10
www.velodyne.com
4 - WiConnect User’s Manual
A. cHAnnel: Select broadcast frequency. This cHAnnel selection must match cHAnnel selection on
the transmitter.
B. LFE INPUT: Optional wired connection to receiver, if not using the wireless connection.
c. PHASE: Invert the phase of the subwoofer, if it blends better with the satellite speakers.
d. LOW-PASS CROSSOVER: Select the upper frequency to cut-off the audio signal to the subwoofer
output.
e. ACTIVE:
• Solid yellow when ON/ACTIVE using wireless connection.
• Flashing yellow and green when ON/ACTIVE , but no RF signal.
• Solid Red when in ON/STAND BY.
• Subwoofer goes to STAND BY if no audio signal is present for 12 minutes.
F. VOLUME: Adjust subwoofer volume.
G. POWER: Switch power On and OFF.
See also other documents in the category Velodyne Audio:
- CHT-Q Series (26 pages)
- CHT-R Series (24 pages)
- DEQ-R Series (26 pages)
- Digital Drive Series (54 pages)
- Digital Drive 1812 Signature Edition (57 pages)
- Digital DrivePLUSSeries (19 pages)
- Digital DrivePLUSSeries (42 pages)
- Digital DrivePLUSSeries (40 pages)
- EQ-Max Series (24 pages)
- Impact Series (20 pages)
- MicroVee (24 pages)
- MiniVee Series (20 pages)
- Optimum Series (28 pages)
- SC-602 Amplifier (27 pages)
- SC-ICG (12 pages)
- SC-IF/IC (14 pages)
- SC-IWBB (64 pages)
- SMS-1 (49 pages)
- SPL-800i (20 pages)
- SPL-Ultra Series (22 pages)
- SubContractor Series (30 pages)
- VX-11 (16 pages)
- WiConnect (19 pages)
- Wi-Q (29 pages)
- CHT Front Row System (6 pages)
- CHT-15 (12 pages)
- Deco (12 pages)
- DF-10sc (6 pages)
- DLS-3500 (6 pages)
- DLS-R Series (9 pages)
- DPS 10-12 Series (17 pages)
- DS-10 (49 pages)
- FSX-12 (8 pages)
- HGS 10 (10 pages)
- HGS-12X (19 pages)
- HGS-15 THX Ultra 2 (10 pages)
- HGS-15X THX Ultra 2 (20 pages)
- SPL-800 (8 pages)
- SPL-800 Series II (20 pages)
- SPL-R Series (17 pages)
- VA-1250X (8 pages)
- VA-806 (6 pages)
- VA-907.2 (6 pages)
- VDR Series (18 pages)