VDO WL X2 DW - Manual (Page 176)

X2DW VDO CYCLECOMPUTING 20
GB SLO PL JP JP PL SLO GB
www.vdocyclecomputing.com X2DW 21
6. Terms of guarantee
Please contact the dealer from whom you
purchased the device for all complaints and
guarantee claims. Or send your complaint
directly to:
Cycle Parts GmbH
Große Ahlmühle 33
D-76865 Rohrbach (Germany)
We would be pleased to answer any technical
questions you might have at the following
hotline number:
+49 (0) 63 49 - 96 35 - 10.
Additional technical information is available at:
www.vdocyclecomputing.com
We reserve the right to make technical changes in
the course of further development.
VDO Cycle Parts grants a guarantee of 5 years
from the date of purchase for your VDO computer.
The guarantee covers material and processing de-
fects on the computer itself, on the sensor/trans-
mitter and on the handlebar holder. Cables and
batteries as well as assembly materials are excluded
from the guarantee. The guarantee is only valid
if the parts concerned have not been opened
(exception: battery compartment on the compu-
ter), no force has been used and there is
no sign of wilful damage.
Please take care to keep the receipt as it must
be presented in the event of a complaint.
If the complaint is justified, you will receive a
comparable replacement appliance from us.
You are not entitled to an identical replacement
model if the model in question is no longer in
production due to a change of model.
8. Troubleshooting
Here you can find a list of possible faults, their causes and what you can do about them:
Error Possible cause Correction
Half segments on the display
(e.g. after a battery change) Computer software not running
correctly after battery change Take out battery and insert
again
No speed display Distance from sensor to
magnet too big Correct position of sensor
and magnet
No speed display Computer not properly clicked
in the handlebar holder Place computer head in the
handlebar holder, twist until
it clicks
No speed display Wheel circumference is not
correctly set or is at zero Set wheel circumference
Display becomes weak Battery dead Check battery, replace if nec.
Display becomes weak Temperatures under 5° make
the display sluggish At normal temperatures the
display will work normally
again
Computer battery life-span:
600 cycling hours, approx. 12,000 km (7400 m)
Transmitter battery life-span:
1000 cycling hours (approx. 20,000 km (12,000 m)
Working temperature of the display:
-15 °C to +60 °C
Speed range:
for wheel size 2155 mm, min 2.5 km/h, max 199.5 km/h
Ride time measurement range:
up to 23:59:59 HH:MM:SS Computer :
approx. 45 x 52 x 16 mm, weight: approx. 45 g
Handlebar holder:
weight: approx. 15 g
Transmitter:
weight approx. 20 g
Computer battery:
3V, type 2032
Transmitter battery:
3V, type 2032
7. Technical spezifications
Stopwatch measurement range
up to 23:59:59 HH:MM:SS
Day‘s trip counter measurement range:
up to 999.99 km or mi
NAVIGATOR measurement range:
up to 999.99 km or mi Total KM 1 and 2 measurement range:
up to 99,999 km or mi
Total kilometers measurement range:
up to 199,999 km or mi
Wheel circumference setting range:
from 100 mm to 3999 mm (3.9 to 157.4 inches)