VDO WL X2 DW User Manual

Page 175

X2DW

VDO CYCLECOMPUTING

SLO

www.vdocyclecomputing.com

X2DW

Set navigator back to zero:

Using go to NAVIGATOR/
SELECT. Confirm with

NAVIGATOR/SET
Using switch to
NAVIGATOR/RESET.
Confirm with

Security question: NAVIGATOR/RESET?
Confirm with

NAVIGATOR/SET DONE appears briefly and your
VDO computer automatically returns to the NAVI-
GATOR/SELECT start menu.

Select NAVIGATOR/FORWARD or
NAVIGATOR/BACKWARD using

. Confirm with

NAVIGATOR SET DISTANCE/
CONTINUE. The flashing digit
is ready to be set. Using
set the digits. Access next digit
with

. Repeat steps until last

digit is flashing. Confirm with

NAVIGATOR/SET OK? Confirm with

NAVIGATOR/SET DONE appears as confirmation
and your VDO computer automatically returns to
the NAVIGATOR/SELECT menu.

Note: The navigator always runs automatically
at the same time, even if you have not set it.

Sleep mode 1 switches itself on after 5 minutes if
no speed impulses are processed and no button
is pressed.
Sleep mode 1 is ended when speed impulses are
processed again (when cycling) or a button is
pressed.

In Sleep mode 2 the wireless receiver is also
switched off.

(after 15 min).

5.8 Sleep mode

Your VDO computer is equipped with a two-fold
sleep mode function.
In sleep mode, a large part of the display is switched
off to save battery power. Time, service interval
display and the -symbol (if the stopwatch is
running) continue to be displayed.

The display shows SLEEP
MODE/PRESS BUTTON
Before continuing to ride, you
must press a button to switch
the receiver back on.

Using go to DATA RESET/
SELECT. Confirm with

Use to go to the data you
want to reset:

DATA RESET/TOUR DATA

DATA RESET/TOT RIDE TM

DATA RESET/ODO TOTAL

DATA RESET/NAVIGATOR

Confirm your selection with

Query: SELECTED DATA/RESET?

ATTENTION: This step cannot be reversed.

Only confirm with

, if you want to delete the

selected data. The display confirms: DATA RESET/
RESET DONE. Automatic return to SETTINGS/SELECT.

You use the RESET function to set any of these back

TOUR DATA

ODO TOTAL

TOT RIDE TM

NAVIGATOR

With the respective reset modes, the following
information is deleted:

TOUR DATA: Day‘s tripdistance, ride time,

average speed, max. speed, cadence (option)

ODO TOTAL: Total km, km bike 1, km bike 2

TOTAL RIDE TM: Total ride time, ride time bike 1,

ride time bike 2.

NAVIGATOR: all values from the second

distance counter.

Using go to SETTINGS/
SELECT. Confirm with

You are now in setting mode
(pressing

for 3 seconds gets

you back to function mode).

5.9 Reset functions

The display for the speed and
the cadence flashes.

The computer now waits for speed and cadence
signals (as long as cadence is installed). Simply set
off riding now. The computer acquires the digital
encodings from the transmitter.