Ubiquiti Networks PowerBridgM10 - Manual (Page 6)

*720-00062-01*
720-00062-01
5. Connect the Mounting Bracket to the Dish:
a. Insert two M10x25 Bolts through the bottom of the
Mounting Bracket and through the Dish. The bolts
should be on the inside facing outward.
b. Secure each bolt using a M10 Washer, a M10 Spring Lock
Washer, and a M10 Hex Nut.
c. Slide the Mounting Bracket onto the Elevation Rod.
d. Secure the Mounting Bracket to the Elevation Rod using
a M16 Washer, a M16 Spring Lock Washer, and a M16
Hex Nut.