Installation requirements, Hardware installation – Ubiquiti Networks PowerBridgM10 User Manual
Page 3
Installation Requirements
• Adjustable wrench or one 16 mm and one 24 mm wrench
• Phillips screwdriver
• Shielded Category 5 (or above) cabling should be used for
all wired Ethernet connections and should be grounded
through the AC ground of the PoE.
We recommend that you protect your networks from the
most brutal environments and devastating ESD attacks
with industrial-grade shielded Ethernet cable from Ubiquiti
Networks. For more details, visit www.ubnt.com/toughcable
Hardware Installation
To install the PowerBridgeM10, perform the following steps:
1. Align the Radio to the back of the Dish.