Turning Technologies PresenterCard - Manual (Page 4)

PresenterCard 4
ABOUT PRESENTERCARD
PresenterCard is a radio frequency hardware clicker that interacts with Turning Technologies polling software allowing
presenters mobility in the classroom. Additionally, presenters have the ability to customize the device to their needs.
System Requirements
The following requirements are necessary for PresenterCard to properly function:
One of the following receivers:
l
RRRF-02 receiver - 4.6 firmware or higher
l
RRRF-03 receiver - 2.7 firmware or higher
l
RRRF-04 receiver - 2.7 firmware or higher
One of the following software applications:
l
TurningPoint Cloud - 6.0 or higher
l
TurningPoint 5 - 5.0 or higher
l
TurningPoint 2008 PC - 4.3 or higher
l
TurningPoint AnyWhere PC and Mac - 3.0 or higher
Changing the PresenterCard Channel
The PresenterCard and RF receiver channels must coincide.
1 Press the Channel button on the PresenterCard.
2 Press the Forward or Back button to increase or decrease channel numbers.
3 Once the desired channel number is shown on the LCD display, press the Channel button to set the channel.
turningtechnologies.com/user-guides