TK Audio Transceiver - Manual

Transceiver
The Transceiver is a four channel universal interface between balanced and unbalanced gear. Each
channel has a send level and a 0-20dB gain for the returns. A polarity switch is also provided on
the return channels.
* Hook up your guitar pedals and old tape-echos to your DAW or consol inserts.
* Use it as a linebox for your bass, keyboard and guitar.
* Also a perfect tool when you like to hook up your bass directly to your favourite pre’s mic input.
*
The transceiver is also a very useful re-amping tool.
* Use your studio gear on stage by using the transceiver as a driver then route the balanced signal
back through the transceiver to get an unbalanced instrument level back again.
0dB balanced to +6dB unbalanced
0dB unbalanced to +6dB balanced
Max balanced input: +27,5dBu
Max unbalanced send level: +22dBu
Max return input level: +22dB
Return gain: 6-26dB
Return input impedance: 1Mohm
Max balanced output: +27,5dBu
Send frequency response: 10-100kHz +/-0,1dB
Send THD+N @ 1kHz: less than 0,001%
Return frequency response: 10-100kHz -0,2dB (at 10Hz)
Return THD+N @ 1kHz: less than 0,003%
Rear panel has four XLR inputs and four XLR outputs.
Built in power supply, 230V or 115V (not selectable).
Send jack
Send level
Return jack, 1Mohm impedance
Flips the polarity on the return signal
Return gain 6 to +26dB gain