Thermionic Culture THE ROOSTER 2 2 Channel mic, pre amp with eq - Manual (Page 13)

©Thermionic Culture Ltd., May 2014 12
6 Specification
Measurements are made at ‘Attitude’ setting ‘1’. in Triode
mode with an output of +4dBu. Measurements made with AC
mains input 236V 50Hz. Load resistance is 10kΩ.
Available gain (dB)
Mic
Line
56 (87 with Attitude at max. (P))
24
Frequency response
±1dB
10Hz to 45kHz
Distortion
(THD @ 1kHz) ≤0.05%
Noise (unweighted, 30kHz
filter)
≤95dB below MOL
MOL
(2% THD @1kHz) ≥+25dBu
Phase shift
24º (6.6%) at 10kHz
Input impedance
Mic
Line
DI
1kΩ
10kΩ
100kΩ unbalanced
Output impedance
600Ω
10k
Ω is the ideal load impedance. The Rooster 2 will work into a
load of 600Ω, but distortion will increase & MOL will be reduced.