TFC Group V86/1,2,3,4 Digi 322 - Manual (Page 3)

3
KEYPAD DESCRIPTION
Mo – Su – Day selector
Reset* – Clears all programs and actual time
S/W* – Switch for daylight savings time functions
Prior. – Sets priorities
Year – Sets year when setting actual time or DST
CL – To cancel an individual program step
R – Used to review the program
1X – Used to enter a one time schedule
N – Used to enter an intermediate step in a
program block
– Recalls actual time (Time of Day)
S – Used to store the final step in a program
block
– Sets the momentary contact
– Used to set the end of a multiday
holiday period
Day – Used to set the day of the month
Month – Used to set the month
h+ – Hour advance
h– – Hour reverse
m+ – Minute advance
m– – Minute reverse
I/O – Sets ON (1), OFF (0) command for each
channel
– Manual override for each channel
*Recessed buttons—use a long pen point or pencil
LCD DISPLAY ELEMENTS
The LCD incorporates a number of different elements
to display various data and information.
1. Example: Actual date and time of day
2. Example: Daylight savings time
3. Example: Momentary Contact
4. Example: Other displays
PROGRAM BLOCK FORMATION
The purpose of the blocks is to simplify the program-
ming, i.e. switching times that are the same for differ-
ent holidays or periods need not be repeated.
Likewise, when programming ON and OFF times the
date need only be entered once.
The time switch assigns a block number from 00 to 99
to each program with dates entered. All programs
without a date (7-day programs) automatically receive
the block number 00.
Programs with dates – individual days or periods of
days – are assigned an ascending block number (01,
02...99). All programs within a block are stored by
pressing “N”. The last program or portion of a pro-
gram within a block is entered by pressing “S”, thus
closing the block.
Execution of Programs
At beginning of each day the microprocessor deter-
mines which of the stored programs for that day have
the highest priority. Only the highest priority
program(s) will be executed.
Once the Digi 322 is programmed, it will automatically
“look back” and assume the correct ON or OFF switch
position.
PRIORITY
The microprocessor automatically assigns the lowest
priority – “0” – to standard 7-day programs.
Holiday programs with a duration of more than one
day automatically receive priority “1”.
Holiday programs for one day only automatically
receive priority “2”.
A higher priority can be manually assigned to any holi-
day program by using the “Prior.” key.
PROGRAM STORAGE CAPACITY
The Digi 322 can store up to 322 programs. These
322 programs can be freely assigned to different
dates or periods, switching times or channels. A stor-
age position is used each time the button “N” or “S” is
pressed. If all 322 storage positions are used up, four
8’s will be shown in the display.
If a program step is not complete and storage is
attempted with the “N” or “S” button, the missing com-
ponents will blink in the LCD.
SETTING THE TIME
[Example: 8:15 AM, July 10, 1996]
Press “Reset” to clear the time and all programs.
While holding :
Press “Year” to 96
Press “Month” to 7 (July)
Press “Day” to 10
Press “h+” to 8 (AM)
Press “m+” to 15
Release the . The current date and time will be dis-
played, as will the day of the week; the time colon will
blink. Channel settings and override status will be indi-
cated on the right and the +1h indicates that Daylight
Savings Time is in effect, if appropriate.
}
Channel Indicator
in Automatic Mode
(All 4 OFF)
Weekdays
Date Automatic Mode Symbol
Year
Time of Day
+1h
Beginning Date
Ending Date
Daylight Savings Symbol
AUTOMATIC
}
Channel Selection 1...4
(Only ON Commands)
Duration (Seconds)
Weekdays
Priority
Block
Momentary Contact Symbol
Switching Time
1x
FIX
FIX
FIX
FIX
}
One Time Symbol
Switching Time
Manual Override
Indicators (OFF)
Temporary and Fixed