Test Products International 712 - Manual (Page 4)

3. Instrument Overview
3.1 Front View
Rubber Boot Protects the instrument from accidental damage
Display Large 3 Parameter Backlit LCD Display
Battery Condition Icon Shows condition of rechargeable batteries.
Keypad Selects all available functions
Selected Fuel Type N GAS, LPG, LIGHT OIL, HEAVY OIL, OPT 1
(Bituminous Coal), OPT 2 (Anthracite Coal),
OPT 3 (Coke), OPT 4 (Butane), OPT 5 (Wood),
OPT 6 (Bagasse)
Rubber
Boot
LCD
Display
Keypad
Battery
Condition
Icon
Selected
Fuel Type
General Overview (Continued)
Never over saturate your sensors by performing tests on equipment with
gas levels beyond the capability of you analyzer.
Always keep the A762 water trap / filter assembly clean and replace the fil-
ter as necessary. Replacement filter part number is A762F.
This manual will guide you through the functions of the TPI 712 which will
give you many years of reliable service.
Your TPI 712 Flue Gas Analyzer comes complete with the following stan-
dard accessories:
• TPI 712 Instrument
• Rubber Boot (A765)
• Infrared Printer (A740) (model 712A740 comes with the printer)
• Soft Carrying Case (A768)
• Flue Sampling Probe (A770)
• In-Line Filter installed on Flue probe (A762)
• Spare In-Line Filter (one included) (A762F is a package of 5 filters)
• Temperature Probe (GK11M)
• Battery Charger (A766)
• Mini Pump Protection Filter Assembly and spare filters (A763)
• Exhaust Spigot (removable) (A764)
• Pressure Tubing (A774)
• Static Pressure Tips (A776)x2
• Barbed to 1/8” NPT fittings (2 each)
• Gas Valve Adapter (A611)
• Adapter Tubing (
• Instruction Manual
( ) Denotes part number
Your TPI 712 Flue Gas Analyzer has the following options available:
• PC Software for analysis of Data Logging results (see 11 &
Appendix B)
• Infrared PC link for non compatible PCs (see 11 & Appendix B)
• Various Temperature Probes (see Appendix B)