Test Products International 275 - Manual (Page 36)

37 36
Accessories
Standard Accessories Part Number
9 Volt Alkaline Battery A009A
Test Lead Set (1000V CATIII 10A) A085
0.5A / 600V Fuse A107
Soft Carrying Pouch A275
Optional Accessories Part Number
Fused Test Lead Kit FTLK3
Deluxe Test Lead Set TLS2000RB
Carbon Monoxide Adapter A771
Pressure Adapter A620
H. Maintenance
1. Battery / Fuse Replacement: The 275 will display a bat-
tery symbol when the internal 9 Volt battery needs
replacement. If DC microamps does not operate correct-
ly the 0.5A / 600V fuse needs to be replaced. The battery
or fuse is replaced as follows:
a. Disconnect and remove all test leads
from live circuits and from the 275.
b. Loosen the screw from the back of the 275 battery /
fuse cover.
c. Remove the battery / fuse compartment cover.
d. Remove old battery or fuse and replace with new
battery or fuse. Observe the correct polarity on the
battery. Only install the correct value fuse
(0.5A/600V). Failure to do so can result in instru-
ment damage.
e. Reassemble the instrument in reverse
order from above.
2. Cleaning your 275:
Use a mild detergent and slightly damp cloth to clean the
surfaces of the 275.