Add compression and eq to a recorded or live track – Summit Audio ECS-410 Everest Channel Strip User Manual
Page 40
40
Summit Audio, Inc.
Tips and Tricks
Add Compression and EQ to a Recorded or Live
Track
TouchPatch Dyn-EQ-DriveBus
Connections
Insert the Dynamics and EQ into the track:
Plug the output of the track into the Dynamics input.
1.
Plug the main output from the DriveBus back into the track.
2.
Use the ECS-410 Everest as 4 totally Independent
Processors
TouchPatch No Route
Connections
Plug a microphone into the preamp in.
1.
Connect the Preamp output to your recorder.
2.
Plug a line into the EQ input.
3.
Run the EQ output back into your recorder.
4.
Plug a line into the Dynamics input.
5.
Run the Dynamics output back into your recorder.
6.
Plug a line into the DriveBus input.
7.
Run the DriveBus output back into your recorder.
8.
EACH section is totally independent and can be used for 4
different processes simultaneously.