Summit Audio ECS-410 Everest Channel Strip - Manual (Page 23)

23 ECS-410 EVEREST
Fe1- Passive Three Band Equalizer
Fe1- Passive Three Band Equalizer
The Fe1is the perfect tool to sculpt and shape your sound without
sounding over processed. The inductor-based design of the Fe1
gives you phase-coherent control with up to 12dB of boost or cut.
Low Band
The Low EQ band can be set for either a peak or shelving
response and can boost or cut by up to ±12dB. The center point
of the filter band can be set to any of six frequencies: 33Hz, 60Hz,
100Hz, 150Hz, 270Hz, and 390 Hz.
Mid Band
The Boost/Cut controls can boost or attenuate the chosen
frequencies by up to ±12dB. The Bandwidth (Q) is slightly more
than 2 octaves. The center point of the filter band can be set to
any of six frequencies: 560 Hz, 630 Hz, 1 kHz, 1.6 kHz, 2.5 kHz
and 3.3 kHz.
Tip: Easy EQ Setup
1. Turn the gain up.
2. Dial in the frequency.
3. Set the gain to the
desired boost or cut.
Low Band
Frequency
Low Band
Boost/Cut
Bypass
Switch
TouchPatch
Indicator
High Band
Peak/Shelf
Mid Band
Frequency
Mid Band
Boost/Cut
High Band
Frequency
High Band
Boost/Cut
Low Band
Peak/Shelf