StorCase Technology DX150-ZIPKIT Zip - Manual (Page 4)

4 DX150-ZIPKIT Installation
StorCase Technology, Inc. DX150-ZIPKIT User's Guide - Rev. A01
0618
Drive Cover
6-32 x .230"
Flat HD Screws
(2 ea.)
0617
Carrier
(Not Included)
Drive
Bracket
M 3x5 MM Phillips
Flat HD Screws
(4 ea.)
Cables are not shown attached to the carrier
in this illustration for clarity.
Figure 6: Attaching the Cover the Carrier
Figure 5: Installing the Bracket Assembly into the Carrier
8. Place the Drive Bracket assembly into the carrier unit and fasten in place with four (4)
M3 Phillips flat hd. screws as shown in Figure 5.
9. Complete the installation by installing the cover (Figure 6). Carefully insert the sides of
the cover between the carrier and the drive. Slide the cover towards the rear of the
carrier making certain that the lip on the rear portion of the cover is underneath the lip
on the rear of the carrier. Fasten the cover to the carrier with two (2) #6-32 x 0.230"
Flat Hd. screws.