Starrett SR400 Surface Roughness Tester - Manual (Page 31)

SR300 and SR400 Surface Roughness Tester
Pick-Ups
Starrett has developed an extensive range of pick-ups to suit the varied measurement needs of our customers. In addition
to the pick-ups shown below our applications department regularly design and manufacture pick-ups for specific
requirements.
Standard Pick-Up
Cat. No. SR-112-1502
For general surface roughness measurement. Also
available with 10μm (400μin) tip radius. (code 112-1503)
Small Bore Pick-Up
Cat. No. SR-155-P28495
For general use in small bores, grooves and on narrow
surfaces.