Starrett 2900 Capacitive Indicator - Manual (Page 4)

1 ON/OFF Power button. Press and release to turn on, and press and hold for
three seconds to turn off.
2 +/- Plus/Minus sets the direction of the reading
3 ZERO Press and release the ZERO button and the display will zero. The
spindle must not be moved from its zero location until after two
seconds have elapsed.
4 IN/mm Toggles the display between English or Metric modes.
5 SHIFT/SET Dual function button used to enable the, Preset and the Limits (Go/
No Go) function. When enabled the SET (S) icon will be displayed on
the top left corner of the display.
6 LIMITS Press the SHIFT/SET button, then press the LIMITS button to enable
the Go/No Go function. This sets the Min and Max values for the Go/
No Go function.
7 PRESET Press the SHIFT/SET button then press the PRESET button to enable
the PRESET function.
8 ZERO/ABS Dual Function. Press and hold for two seconds to activate the ABS
mode or to exit the ABS mode. To zero the display, see #3 above.
9 MIN/MAX/TIR Displays the minimum or maximum values captured during
setting the min/max limits operation. The TIR function displays
the difference between the two captured readings.
conjunction with the SHIFT/
SET button (also yellow).
To enable these functions
press the SHIFT/SET button
first. The SET (S) icon will
appear in the top left corner.
Then press the button for the
required function
.
9
5
4 & 6
1
3, 7 & 8
2
Button Functions
The functions printed in yellow;
LIMITS and PRESET are used in
4
2900 Capacitive Series Indicator User Manual