D-Link VDI-624 - Manual (Page 31)

31
Using the Configuration Menu (continued)
Tools> Admin
At this page, the VDI-624 administrator can change the system password. There are two
accounts that can access the Broadband Router’s Web-Management interface. They
are admin and user. Admin has read/write access while user has read-only access. User
can only view the settings but cannot make any changes.
Remote Management- Remote management allows the VDI-624 to be configured
from the Internet by a web browser. A username and password is still required to access
the Web-Management interface. In general, only a member of your network can browse
the built-in web pages to perform Administrator tasks. This feature enables you to per-
form Administrator tasks from the remote (Internet) host.
IP Address- The Internet IP address of the computer that has access to the Broadband
Router. If you input an asterisk (*) into this field, then any computer will be able to access
the Router. Putting an asterisk (*) into this field would present a security risk and is not
recommended.
Port- The port number used to access the Broadband Router.
Example- http://x.x.x.x:8080 where x.x.x.x is the WAN IP address of the Broadband
Router and 8080 is the port used for the Web-Mangement interface.
Administrator-
Password-
admin is the Administrator login name
Enter the password and enter again to confirm
User-
Password-
user is the User login name
Enter the password and enter again to confirm