D-Link VDI-624 - Manual (Page 23)

23
Using the Configuration Menu (continued)
Advanced > Filters > IP Filters
Filters are used to deny or allow LAN (Local Area Network) computers from accessing
the Internet. The VDI-624 can be setup to deny internal computers by their IP or MAC
addresses. The VDI-624 can also block users from accessing restricted web sites.
This is the schedule of time when the IP Filter will be enabled. Schedule:
Select the protocol type. Protocol Type:
Use IP Filters to deny LAN IP addresses from accessing the
Internet. You can deny specific port numbers or all ports for
the specific IP address. IP Filters:
The single port or port range that will be denied access to the
Internet. Port:
The IP address of the LAN computer that will be denied
access to the Internet. IP: