Star Headlight & Lantern FM6905 Plug-N-Play Flasher Mobules - Manual (Page 2)

-2-
1. Locate the 3 pin connector in front of the radiator under the cross brace.
2. Remove the loop connector and store for future use if flasher is ever removed from
vehicle.
3. Carefully route and connect the 2 wire harness (Yellow and Blue wires) with the connector
to the vehicle's mating connector making sure the harness will not interfere with moving
vehicle components and will not get damaged in field operation.
4. Carefully route the other wires behind the headlight and around the battery, keeping them
away from all moving parts on the vehicle.
5. Wire Connections:
a. Green - Connect to a reliable ground, preferably to ground terminal of battery.
b. White - Connect to directly to +8-30VDC through a 20A fuse.
c. Black - OPTIONAL Night Time Cutoff.
If not required, cut and tape end with electrical tape.
If required, "T" or tap into the vehicle's parking/marker light wire.
d. Red - Connect to +12VDC through the user provided control switch that will
activate the flasher and 1A fuse.
e. Red/Black – Touch and release to ground to scroll through 7 flash patterns.
Flash Pattern Flash Rate
Slow Alternating 1.9 fps
Fast Alternating 3.0 fps
Fast Simultaneous 3.6 fps
Doubleflash 0.8 fps
Alt. Dbl., Fast Sim, Fast Alt -
Alt. Dbl, Dbl Alt, Dbl Sim. -
Slow Alternating 1.0 fps
FM6905
Headlight
Flasher
B
L
U
E
Y
E
L
L
O
W
Connectors
Vehicle Harness
USER SUPPLIED ON/OFF
FLASHER SWITCH (+12VDC)
RED
R
E
D
/B
L
A
C
K
P
a
tt
e
rn
S
e
le
c
t
T
o
u
c
h
a
n
d
R
e
le
a
s
e
t
o
G
ro
u
n
d
+ -
1
5 A
M
P
F
U
S
E
(N
O
T
I N
C
L
U
D
E
D
)
(8-30VDC)
BATTERY
Good
Chassis
Ground
Good
Chassis
Ground
WHITE
G
R
E
E
N
BLACK
OPTIONAL - Connect to Marker
Lights for "Nighttime cutoff" or
ground if not being used
Wiring
Input Voltage: +8-30VDC
Output Current: 9.5 A per output
Standby Current: <10mA
Flash Patterns: 7
ELECTRICAL SPECIFICATIONS