Star Headlight & Lantern Optimax-DH RP242 - Manual (Page 7)

-5-
WHITE
PLUGS
INTO
POWER
PAK
CTRL
CONNECTOR
RED BLACK
PLUGS
INTO
POWER
PAK
POWER
CONNECTOR
WHITE
WHITE High/Low Wire: High Power Only:
Eliminate SW2, connect white wire with black to ground.
Low Power Only:
Eliminate SW2 and connect white and red wires from the
Power Connector with the black and white wires from the CTRL connector to SW1.
RED BLACK Pattern Select: Touch and release to +12VDC to set pattern then tape off
1
1
SW1 OFF
HIGH SW2
RED
GOOD
CHASSIS GROUND
CONNECT TO +12 VDC
15 AMP
FUSE
BLACK
SP3860-2H-OP SWITCH PANEL (REAR VIEW) (for use with the RP242 or RP244 Strobe Paks)
ON
LOW
2 3
2 3
WHITE
RP242/RP244 On/Off with
High/Low Power Switching
(* All heads activate together)