Operation manual, Advanced conventional suction feed spraygun, Description – DeVilbiss COMPACT P2-11 User Manual

Page 2

Model Part Number

Example:

COM-S430-16

Aircap

Fluid nozzle size

(16 = 1,6 mm)

ITW Finishing Systems and Products reserve the right to modify equipment specification without
prior notice.

EC Declaration of Conformity

We: ITW Finishing UK, Ringwood Rd, Bournemouth, Dorset, BH11 9LH, UK, as the

manufacturer of the Spraygun model Compact, declare, under our sole responsibility, that the

equipment to which this document relates is in conformity with the following standards or other

normative documents:

BS EN 292-1 PARTS 1 & 2: 1991, BS EN 1953: 1999; and thereby conform to the

protection requirements of Council Directive 98/37/EC relating to Machinery Safety Directive,

and;

13463-1:2001, council Directive 94/9/EC relating to Equipment and Protective

Systems intended for use in Potentially Explosive Atmospheres protection level II 2 G X.

B. Holt, General Manager

30th June 2003

Operation Manual

Advanced Conventional
Suction Feed Spraygun

Important

Read and follow all instructions and Safety Precautions before using this

equipment

Description

The Compact Suction feed Spraygun Kit complies to ATEX regulations 94/9/EC, protection
level;

II 2 G X, Suitable for use in Zones 1 and 2

Important:

These Sprayguns are suitable for use with solvent based materials. These guns

are not designed for use with highly corrosive and/or abrasive materials and if used with such
materials it must be expected that the need for cleaning and/or replacement of parts will be
increased. If there is any doubt regarding the suitability of a specific material contact your local
Distributor or ITW Finishing direct.