Sioux Tools 1412 - Manual (Page 4)

4
Printed In U.S.A.
GENERAL SAFETY INSTRUCTIONS
FOR AIR TOOLS
1. KEEP WORK AREA CLEAN: Cluttered areas and benches invite accidents.
2. AVOID DANGEROUS ENVIRONMENT: Keep work-area well lit,
3. KEEP CHILDREN AWAY: All visitors should be kept safe distance from work area.
4. STORE IDLE TOOLS: When not in use, tools should be stored in dry, high or locked-up
place-out of reach of children.
5. DON’T FORCE TOOL: It will work best and safest at the designed rate.
6. RIGHT TOOL USE: Don’t force small tool to do the job of a heavy-duty tool.
7. WEAR PROPER APPAREL: No loose clothing or jewelry to get caught in moving parts.
8. USE SAFETY GLASSES: Use safety glasses with most tools. Also face or dust mask if it
is a cutting operation.
9. SECURE WORK: Use clamps or vise to hold work. It’s safer than using your hand and it
allows freedom of both hands to hold tool.
10. DON’T OVERREACH: Keep proper footing and balance at all times.
11. MAINTAIN TOOLS WITH CARE: Keep tools sharp and clean for best and safest perfor-
mance. Follow instructions for lubricating and changing accessories.
12. DISCONNECT TOOLS: When not in use: before servicing; when changing accessories
such as blades, bits, cutter, etc.
13. REMOVE ADJUSTING KEYS AND WRENCHES: Form habit of checking to see that keys
and adjusting wrenches are removed from tool before turning it on.
14. CAUTION: The use of an accessory with this tool not provided or specified by SIOUX
TOOLS may be hazardous.