Sioux Tools 1297 - Manual (Page 2)

2
INSTRUCTIONS FOR BACKING PAD
1. Place disc holder, backing disc and retainer on to the spindle.
2. Place the abrasive disc on to the spindle.
3. Thread the lock nut on to the spindle.
4. Hold the spindle with the 1" (24.5 mm) open wrench and turn the abrasive disc until it is tight on the spindle.
*Sound Pressure *Sound Power *Vibration
Catalog No. dBA dBA m/s 2
1290 80.2 92.6 3.9
1290-3000 80.2 92.6 3.9
1290B 80.2 92.6 3.9
1290B3000 80.2 92.6 3.9
1290LK 80.2 92.6 3.9
1290LT 80.2 92.6 3.9
1290LKX 81.0 92.7 3.9
1290X 81.0 92.7 3.9
*per PN8NTC1 *per PN8NTC1 *per ISO 8662-4
SOUND AND VIBRATION READINGS
LOCK NUT
ABRASIVE DISC
BACKING
DISC
RETAINER
TOOL SPINDLE
DISC HOLDER
Always remove the tool from the air supply before installing or changing sanding discs!
WARNING
DECLARATION OF CONFORMITY
We, Sioux Tools Inc., 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, declare under our sole responsibility that the products
1290, 1290-3000, 1290B, 1290B3000, 1290LK, 1290LT, 1290LKX, 1290X
to which this declaration relates are in conformity with the following standard or standards or other normative document or documents:
EN 792 (draft), EN 292 Parts 1&2, ISO 8662, Pneurop PN8NTC1
following the provisions of
89/392/EEC as amended by 91/368/EEC & 93/44/EC Directives.
June 1, 2003
Murphy, North Carolina, USA
Date and place of issues
Gerald E. Seebeck
President
Sioux Tools Inc.
Name and position of issuer Signature of issuer