Private network configuration, Voicegate – Digicom 8D5499 User Manual
Page 17
Digicom S.p.A.
Manual rev.2.0
Pag. 17
Private Network Configuration
The information concerning the reading and the LAN part parameters are displayed in this window:
<-----
Attention: do not insert an IP
address of the same network
used in the WAN configuration
“PublicNetwork
Configuration”. If the WAN
address is 192.168.2.1 you
cannot use addresses
192.168.2.x.
Enable DHCP Server:
Enables/Disables the DHCP Server functionality to the LAN
IP Address:
Device IP Address – LAN side
Subnet Mask:
Device Network Subnet Mask
Address Pool List:
List of IP addresses to be assigned to the devices connected on
the LAN side. (This features is on only if the DHCP server is
enabled)
IP Address Pool Mask:
Network Mask of the addresses to be assigned to the LAN side.
Router List:
Default Gateway for the LAN side
Dns List:
List of active Domain Name Server
Domain Name: Domain
name
Leased Time:
Validity time for the IP address assigned to the devices
connected to the LAN side (valid only if the device is configured
as a DHCP server)
NAT:
Enables/Disables the NAT protocol