Q-See QSW1001R - Manual (Page 11)

11
Motion Detect Off
Motion Detection Area
(1) Press MENU to enter system main menu.
(2) Press LEFT/RIGHT to setup option, and then press OK to confirm.
(3) Press LEFT/RIGHT to motion detect area option.
(4) Press OK to motion detect area setup.
(5) Press LEFT/RIGHT to choose detect area and then press OK.
(6) Press UP/DOWN/LEFT/RIGHT to move detect area and then press OK
to exit motion detect area setup.
The dashed frame is the motion detect area.
Detect area can be divided into L / M / S